There are many kinds of flagpoles, such as glass fiber, carbon fiber, mixed fiber, aluminum alloy, stainless steel, etc., and the functions are divided into advertising, tourism, leisure, entertainment and so on. Flag shape can be designed according to your own preferences
1. Firstly, according to the length of the flagpole, the shearing plate is used. The selected stainless steel flagpoles are mostly 201 and 304, 316, etc., and the thickness is usually between 2.5mm and 4.0mm. This process requires the use of a large shearing machine, which can only be slightly longer and not shorter. Cut into an isosceles trapezoid, according to the geometric principle, so that it is rolled up into a cone.
2, the next is the bending and curling, it is very important, if it is not professional, it may not be formed. The isosceles trapezoidal board was placed on the bending machine for curling, and the original shape of the stainless steel flagpole was made.
3. After the flagpole is formed, seamless welding is required, and argon arc welding technology is required. Stainless steel flagpole welding must be done without gaps, no burrs, and the foundation for the next flagpole polishing mat.
4, polishing and polishing. This process requires polishing with a professional gauze. Apply even force and continue to polish until the weld is the same as the unwelded one. Such a flagpole is basically made.
If you have any question please contact me freely! ^^