The cutting plotter film is a vinyl lettering sticker material made of PVC material with an adhesive on the back and a composite material coated with silicon protective paper as the base paper.
How to operate the lettering sticker:
1) First select the location where the sticker is pasted, then wipe off the dust or grease on the place to be pasted.
2) Hand-held stickers first compare how to paste the most suitable
3) Because it is generally attached to the glass, it is recommended to spray the water on the glass and the sticker properly, then stick it up, and finally adjust the position, and scrape the water with a scraper.
4) If you have a bubble, stick it with a needle and then flatten it with a cloth.
If you have any question please contact me freely.