Lifeboat Load Test Water Bag is a uniform load or overall load test equipment for a lifeboat. Because of its simple operation, convenient transportation and storage, it is widely used in lifeboats, small bridge loads, elevators, lifts, loading platforms, gangways and other load tests.

Composition of Lifeboat Load Water Bag Equipment: Water Bags and Remote Water Supply System

Lifeboat water bag composition: water bag body, inlet and outlet, safety exhaust valve, fixed handle.

1. Water bag body: It is made of anti-radiation high-strength PVC coating material. Under normal conditions, the material life can reach 10-15 years. The water bag adopts a cylindrical appearance design, and the height of the water bag will not exceed 50cm, so as to ensure that the water content is more than 95%.

2. Inlet and outlet: The inlet is a TYPE F type PP quick connector with a valve. During the installation process, the PVC steel wire inlet pipe can be quickly placed on the water bag; place the water outlet under the side of the water bag, in It is convenient to drain the water during the discharge.

3、Safety exhaust valve to prevent the water bag gas or water pressure from breaking the water bag too much; when the water injection process, some air will enter the water bag with the liquid, when the bag pressure reaches about 15kpa, the safety exhaust valve Start the work and eliminate the gas inside the bag body. After the water bag is fully loaded, excess water can be discharged to remind the operator that the water bag is full.

4. Handle: Fixed lifeboat load test water bag, which will not be moved by water in the process of filling with water. It is very good to protect the role of water bag. Suggestion: The handle is not used to move the water bag. Do not move the water bag filled with water by pulling the handle.

5, remote water supply system components: DN40 pneumatic diaphragm pumps, DN40 flow meter, DN50 - DN25 water distribution, and DN25 and DN50 steel pipe and so on.

Lifeboat load test water bag specifications (100kg, 250kg, 375kg, 500kg, etc. can be customized)

DERFLEX is professional PVC coated fabric and water bags material manufacturer and supplier in China. If you have more interest, please contact our sales department freely.