After the plating of the label, but also the amount of semi-finished products cut off. The label semi-finished products on the appropriate position in the trigger, cover a cardboard and then cut, so as not to scratch the surface of the plating plate.
2, select the decorative plate
The plate behind the plate is an indispensable part of the installation and installation of the sign. It makes the sign more perfect.
3, sticky board
On the selected decorative board, measure and mark the position where the signs are to be pasted.
In the decorative board stick two double-sided tape, in the four corners and the middle position squeeze some glass glue, tear off the double-sided tape on the protective paper, the stainless steel plate stick to the decorative plate, forced pressure, flat 5 minutes the above.
4, custody
Put the finished work into the bag, keep it well.