According to the application area, glass films can be divided in to architecture film, furniture film, car sticker and Explosion-proof film
Building glass film is divided into two major series: building energy-saving film and security film.

The main varieties are: body dyeing film, reflective insulation film, high permeability magnetron sputtering film, low radiation (LOW-E) film, museum and archives for film, scrub and translucent decorative film, gradient decorative film, transparent Safety film and so on.
1.Body staining film A is a non-resistant layer of non-secondary dyeing film, another B is a deep staining film, in good quality polyester on the dyeing process, the polyester film body can be dyed a variety of beautiful eye-catching The color. The dyeing film does not contain metal components. They can reduce the dazzling light and prevent fading, but also can reduce the heat absorption caused by heat accumulation.

2.Reflective insulation film, insulation film is basically a polyester substrate (PET), coated with anti-scratch layer (SR), the other side is the installation of adhesive layer and protective film. When the installation is installed, the protective film is peeled off, and the side of the exposed layer is affixed to the inner surface of the glass (if it is specially designed for external film, then the outer surface of the glass)

3.High-permeability magnetron sputtering film, vacuum magnetron sputtering technology is a use of the cathode surface with the magnetic field to form an electronic trap, so that the role of E × B electrons close to the cathode surface drift. At present, the civilian is mainly through this technology to achieve energy saving, environmental protection and so on. In the heat, blocking light and security and other aspects of a good effect. Magnetron sputtering film color to the metal primary color, different from the color of the color film, so in the process of selection of people prefer to like the black and gray color of the people

4.Low radiation (LOW-E) film: Low-E glass is the use of vacuum magnetron sputtering method on the glass surface coated with one or two or even three layers of silver layer of the film, to reduce the energy absorption or control of indoor and outdoor energy exchange, to protect life, work vity Comfort, and in order to achieve the purpose of environmental protection and energy conservation. Low-E glass has the characteristics of low heat transfer coefficient and reflective infrared. Its main function is to reduce the indoor and outdoor far-infrared radiation energy transfer, and allow solar radiation as much as possible into the room, thus maintaining the indoor temperature, saving heating, air conditioning costs. This product's visible light through the higher, the reflected light color lighter, almost difficult to see.

5.Museum and archives for film

6.Scrub and translucent decorative film, frosted film in the architectural glass film is also the most widely used and the price is the lowest of a film. Has a strong decorative effect, a wide range, there are basic colors, white, translucent, opaque and a variety of geometric patterns, style and diverse, suitable for a variety of room design and decoration. With decoration decoration, energy saving, and create a private space and so on. Compared to frosted glass and process glass, this film has a durable, fast installation, low cost advantages, but also according to individual wishes at any time to replace the decorative patterns.

7.Gradient decorative film

DERFLEX is professional glass film manufacturer in China, with experience over 15 years. If you have more interest in our products, please contact us freely.