PVC wallpaper pure paper, non-woven fabric, woven fabric, etc. are used as the substrate, and PVC paste resin is sprayed on the surface, and then printed. Processed by embossing and other processes. It has a strong three-dimensional effect and can be made into various realistic texture effects, such as wood grain and imitation ceramics. It has a strong texture and breathability, can resist the erosion of grease and moisture, and can be used in the left and right places in the home, including the kitchen and bathroom.

PVC Wallpaper Rolls advantages: rich colors, various textures, colorful colors, can be customized according to product design needs, low price, more popular.

PVC wallpaper paving notes
1. The base layer of the wall should be smooth and smooth, the yin and yang angle lines are smooth, straight, no cracks, corners, and pitting. After handling the wall base, you need to brush the nitro or alkyd varnish again to prevent When the wall is floured, it should be kept thin, even, and not too thick.
2. When using wallpaper, you should use environmentally friendly special glue, which is good in viscosity. One kilogram of glue can be attached to 7m2.
3. The glue is applied to the wall, and the glue is applied to the back of the wallpaper and left to stand for about one minute.
4. Posting method Dry paste method, wallpaper is not stained with water, butt, flower, tight, or with lap joint construction method, can not squeeze the glue out of the seam.
5. Use a soft plastic scraper, push the wipe to be careful, can not say that the rubber is extruded on the surface of the wallpaper or on the scraper. If it is accidentally squeezed out, it must be cleaned with a wrung wet towel to keep the wet towel clean.

If you have any question please contact me freely!