Self-adhesive PVC coated wallpaper paste method:

1. Wipe the dust and grease stains on the surface to be cleaned and dry (the surface should be flat and not wet)

2, before holding the sticker, hold the sticker and draw the position, then measure the crop.

3. From top to bottom, carefully paste the PVC wallpaper roll, and gradually remove the backing paper. When removing the bottom paper, use a soft cloth or towel to gently wipe the two sides from the center of the wallpaper to discharge all the bubbles. Make sure you get a smoother effect.

4, if there is a bubble after the paste, use a needle to tie it, run off the air on it, although self-adhesive wallpaper, but can really paste the PVC wallpaper for room is good to find an experienced wallpaper installation master to help, it is recommended to find Master Wallpapers installation platform wallpaper installation master is better, because you may have wrinkles, curls, bubbles or something, you can stick it down easily, it is not easy to tear it off.

Any interested, pls contact with our sales Magic, WhatsApp: +8613651741173