Appearance Requirements of 25-ton vehicle water bladder

1. At -10-80°C, it should be easy to open without brittle cracking and damage to the rubber surface. The cloth should be completely saturated with rubber, and there should be no exposed cloth on the surface. The two layers of the shingle should be bonded together with glue material.

2. The surface protective layer must be continuously and uniformly bonded to the surface of the cloth to achieve a tight coverage. The rubber (sheet) material must be uniform, and the embedded mineral particles (sheets) should not cause damage to the material.

3, the surface should have rubber self-adhesive and protective tape.

4. There are no visible defects on the surface, such as holes, uncut edges, cracks, cracks, pits, and drums.

25 tons of soft vehicle water bladder

Material: 0.9mm PVC double-sided coating material

Size: length×width×height: 11m×2.06m×1.1m

Volume: 25 cubic meters

Production process: high frequency welding (no hot air welding)

The use of Footwalk-flexible bladder

It is mainly used for vehicle-mounted freight wastewater treatment and recycling.

If you have more interest in our flexible tanks, please contact our sales department for more information.